Catalogue

1 Overview of F15-24 Port Hard Disk Test System

● F15-24 port hard disk test system overview

● Control panel buttons

2 Overview of Hard Disk Storage

● Overview of Hard Disk Storage

● Supported hard disk interface types

3 Base plate and sub-plate system

● Overview of base plate and sub-plate system

● Replace and install the sub-board

4 Peripheral ports and connections

● Peripheral connection

5 Technical information

● Fan parameters

● Power parameters

● Accessories specifications

6 Operation Guide

● Software interface introduction

● Introduction to setting interface

● Function introduction

7 Xuneng warranty and support

● Warranty

● Technical support

● After-sales service center

1 Overview of F15-24 Port Hard Disk Test System

This system can perform hard disk testing. You can connect 24 hard disks in parallel to perform hard disk health test, verification, hard disk data copy, hard disk data erasure and other operations. This system has the characteristics of high efficiency, labor saving, power saving and space saving.

● F15-24 port hard disk test system overview

● Control panel buttons

Overview of F15-24 Port Hard Disk Test System

Control panel overview

2 Overview of Hard Disk Storage

The hard disk warehouse is made of insulating material Bakelite, and is composed of partitions, data processing ports, sub-boards, work indicators, and warehouse serial numbers. It is the connection system between the hard disk and the test system.

● Hard disk warehouse overview

● Supported hard disk interface types

Hard disk warehouse overview

Supported hard disk interface type

The F15-24 port hard disk test system fully supports the mainstream SATA and SAS interface hard disks currently on the market, and can simultaneously perform data processing on ordinary hard disks and solid state hard disks with SATA interface and server SAS hard disks.

3 Base plate and sub-plate system

The F15-24 port hard disk test system has an original detachable structure of bottom board + secondary board, which not only guarantees the stability of power supply and data interaction, but also effectively

protects the hard disk. It also facilitates port maintenance and extends the service life of the equipment.

● Overview of base plate and sub-plate system

● Replace and install the sub-board

Overview of base plate and sub-plate system

Replacement and installation of sub-board

The F15-24-port hard disk test system has a self-invented detachable structure of bottom plate + sub-board, and customers can replace accessories by themselves with simple tools. It greatly facilitates the maintenance of the equipment and prolongs the service life of the equipment.

4 Peripheral ports and connections

● Peripheral connection

Peripheral connection

The peripheral devices that need to be connected to the F15-24 port hard disk test system are as follows:

Display X1 Keyboard X1

F15 test system drive X1 only

5 Technical information

● Fan parameters

● Power parameters

● Packing specifications Fan parameters

Voltage: DC12V, current: 0.24A, speed: 4500R/M Power parameters

AC input: 100-240V-15-8A 60/50Hz

Rated power: 1250W +5V and +3.3V Maximum output power: 170W

DC output

Packing specification

Carton size: 53.5*53.5*36CM Net weight: 16.6kg Gross weight: 18.6kg 

6 Operation guide

Warning: Using this system to erase the hard disk may cause damage to the hard disk or loss of hard disk data, please be careful! ! !

This hard disk detection system is an independent host, which needs to be used with a monitor and keyboard. Before installation, please check whether the casing is scratched or damaged, whether there are any parts falling off, abnormal noise, etc. If you find the above, please contact the dealer.

How to boot?

First check whether the power cord, display, keyboard and dongle of the host are connected well, and then check whether the main power switch on the power supply behind the host is turned on. After checking, you can turn it on by pressing the switch on the control panel. Please be sure to remove the hard disk before booting, and boot up empty. Since the system needs to load hardware drivers, you need to wait for 2-4 minutes when starting up. Do not shut down or cut off the power during this process.

Introduction to the software interface

This interface is the main interface of the F15 test system after it is turned on. It is divided into three parts: upper, middle and lower.

The top is the software instruction area and hard disk information area:

——The top interface diagram of the main interface——

The top left is the software version, and the right is the current task menu, that is, the task currently being performed on the port.

The left is the basic information display area of the hard disk. When the hard disk is connected, the specific information of the hard disk can be automatically read and displayed automatically; the middle is the hard disk MHDD test result display area, which displays specific data in real

time during the hard disk test process, including white dots and color blocks , Bad area, etc.; on the right is the SMART table information display area, which can be automatically read and displayed when connected to the hard disk, and the hard disk health value is automatically reported: GOOD is good, and WARRING is warning. BAD is unreadable.

The middle of the main interface is the device port list:

——The main interface device port interface diagram——

The port number on the left is No. 1-24, which corresponds to the physical port on the device one-to-one. It mainly displays the basic information of the hard disk. You can switch between the three lists of MAIN, MHDD, and SMART by pressing the "TAB" key. Three parts of

information on the left, middle and right. Port 1-32 is displayed by default, and you can switch pages by pressing the "Page Up" and "Page Down" keys on the keyboard, or switch line by line through the "" and "" keys.

The bottom of the main interface is the function key display area of the software:

——The bottom interface diagram of the main interface——

F1 is for help, providing help information.

F2 is the setting button of the software. Press F2 to enter the setting interface of the software.

F5 is the refresh key. Press F5 to refresh the real-time progress of each port task (the system defaults to refresh the progress every 5 seconds).

F9 is the script control key. Press F9 to enter the script selection interface and select the corresponding script to operate.

F10 is the all cancel key, press F10 to cancel the ongoing operations of all ports.

Finally, the software serial number, system time, number of tasks, etc. are displayed.

The main interface access to the hard disk display diagram:

——The main interface shows the picture after inserting the disk——

After the hard disk is connected, the system automatically reads the basic information of the hard disk and displays the parameter items in the corresponding area.

Software main menu setting interface:

——Software Set Interface——

Press "F2" to enter the setting interface of the software. The main menu on the left is: "Task Steps" - Task Steps;"Task Options" - Task Settings; "Diagnosis Options" - Rapid test Settings;"Script Options" - Maintenance menu Settings; "Erase Options" - Erase Settings.

On the right is the submenu: "Diagnosis" - rapid test; "Scripts" - Repair submenu;

Never Erase completely;

A"Full Scan" - a Full Scan.

This interface is the first interface after entering the setting, mainly setting the software task menu.

Select the corresponding task item by "" and" ", then select and cancel it by the space bar or the enter key (" * "is checked in the box).

——Task    Options——

This interface sets software task properties. It has two sub-menus: Unlock HpA-restore the maximum capacity of the hard disk;Fix BadSector- To Fix bad sectors of a hard disk as part of a test (erase or scan).

This repair function is mainly aimed at 197 bad logic lines, which can greatly save testing time.

——软件设置界面图-Diagnosis Options——

This interface is for setting up the software Quick test function. The submenu is: "Quick Verify" - Quick check;"Quick Read" - to Read quickly; "Quick Write" - fast Write; "Quick Erase" - To Erase quickly.

This function mainly sets the quick test function of the software, and users can set corresponding Settings according to specific requirements. One of the features of this feature is "Quick Erase" : This function can quickly Erase the 1% and 99%-100% sector content of hard disks and effectively Erase most of the built-in partition table files on hard disks.

——软件设置界面图-Script Options——

This screen is for the clear SMART table and decrypt Settings screen. There are four submenus: "ST F3 Clear SMART" - Seagate F3 series hard drive Clear SMART table;

"ST F3 Clear Glist" - Seagate F3 series Clear G table;

"WD Clear SMART" - Western Digital hard drive Clear SMART table; "WD Clear PWD" - West Number hard drive Clear password.

According to the need to process the hard disk brand select the corresponding instructions can be.

This setting is applied to all 24 ports, that is, all ports of the device after setting are executed according to this task.

——软件设置界面图-Erase Options——

This interface is the interface for setting the erase function of the software. The default erase mode is to fill in <00> to the hard disk sector once.

F15 Test system menu Detail

Setting interface of single zero-clearing and decryption instruction:

——Software F9 key menu——

Press the "F9" key to enter the setting interface of separate clear SMART table and decryption instructions.

This interface operates independently of a separate port.

Contains four submenus: "ST F3 Clear SMART" - Seagate F3 series hard drive Clear SMART table;

"ST F3 Clear Glist" - Seagate F3 series Clear G table;

"WD Clear SMART" - Western Digital hard drive Clear SMART table; "WD Clear PWD" - West Number hard drive Clear password.

This feature only cleans the SMART table or decrypts the currently selected hard drive separately.

After selecting the corresponding menu, press enter, the software will automatically operate, wait for 5-10 seconds to complete the operation,and display the results in the SMART area at the top.

Function Introduction:

Q: How does our device perform the dial?

A: Our device supports testing of SATA, SAS, and SSD.The test method is divided into reading test and writing test, and reading test is divided into fast test and slow test.

1. Read tests

(1) Quick test: our quick test function can quickly resolve the hard disk head, disk and internal bad track and other basic information in a short time.Help users improve their efficiency.

The setting mode is as follows:

(2) slow measurement: our device slow measurement is the use of hard disk overall scanning, scanning all sectors of the hard disk.

The setting method is as follows:

2. Write tests

The write test primarily tests the writing performance of hard disk sectors by writing specific characters <00> to the hard disk.

The setting method is as follows:

In practical applications, the above functions can be combined,  such as fast test and write test combination, slow test and write test combination.

Just select the corresponding function.

Q: Can our device be cleared and decrypted?

A: Our device is capable of wiping the SMART table from the Seagate F3 series and SMART cleaning and decrypting the Western Digital hard drive.

Divided into batch operation mode and separate operation mode.

(1) Batch operation: after setting 24 ports to perform all zero clearance operation, the user only need to plug and unplug the hard disk can.

The setting method is as follows:

Separate port operation.

This feature is set only for the currently selected port. The setting method is as follows:

Select the hard disk that needs to be cleared/decrypted, then press F9 to enter the operation interface.

Select the corresponding hard disk brand and the instruction to be operated by up and down key and then press enter key.

Wait for 5-10 seconds after the operation is complete.

Second,

Q: Does our device have NHPA function? A:Yes.

Q: Does our device have the ability to repair bad sectors?

A: For general logic errors, our device has a built-in function to repair bad sectors. It can repair the sector errors inside the hard disk while testing the hard disk.

The step up is as follow:

All set task menus will be displayed in real time in the right menu at the top of the main interface.

The set menu will be automatically saved in the system. After reboot or shutdown, the task will still be performed according to the previous menu.

After changing the task setting, it is necessary to reset the hard disk port to execute, which can be divided into hard reset and soft reset.

Hard reset: reinsert the hard disk after unplugging

Soft reset: Select the hard disk to be reset and hit enter once.

7 Solectron warranty and support

Low maintenance

● Technical support

● After-sales service card

The warranty 

Dear customers, Hello!

Thank you for purchasing and using our products. It gives us the opportunity to serve you.

In order to make you better use our products, please read this service manual carefully.

I. Service criteria

Conscientiously do every thing, sincere service to every user

II. Service policy

1. Service hours

9:30 -- 17:30, Monday to Friday (except national holidays)

2. Contact information 

Telephone: 020-38335609

Fax: 020-38335610

E-mail: 591077090 @qqNaN

Address: Room 2706, 27 / F, Yuanwang Digital Plaza, No.8 Shipai West Road, Tianhe District, Guangzhou City, Guangdong Province

Zip code: 510630

When you have any questions about product quality, technology and other aspects during the use of the product, please contact us through the above ways, our professionalStaff will provide you with detailed solutions and a full range of solutions.

If you have any comments or Suggestions on our service, please contact us in time, and we will give a timely reply to your questions and Suggestions within 3 working days.

3. Warranty service

Solectron Energy Company formulates the following standards according to the relevant three guarantees of the state:

(1) Product replacement service

The warranty period of the machine is 13 months The warranty period for the back plate is 13 months

Within the time limit agreed above, any quality problem occurred under normal use condition and identified as fault product by the company can enjoy free maintenance or replacement service.

Damage caused by man-made, natural disasters or improper operation is not covered by the warranty.

(2) Return and exchange service

If your products have any quality problems, please contact us within 7 days from the date of purchase, we will conduct a comprehensive test of the products.

If the test results show that the product does have quality problems, the after-sales service department will replace the relevant products for you within 15 working days.

(3) Product warranty service

If the whole machine and accessories have non-human  and irreparable quality problems within 13 months, our company will provide free maintenance services.

Note: No hourly fee or spare parts fee will be charged for the maintenance, but the customer shall pay for the other costs arising therefrom.

4. Paid service

If the product cannot be used normally due to improper use of the user during the warranty period, the after-sales service department will charge a certain fee according to the quantity and type of the damaged product and implement paid service. The specific situation is as follows:

1) Damage caused by improper use, maintenance and storage;

2) Damage caused by user or unauthorized removal;

3) No warranty certificate or valid invoice;

4) The name, model or barcode of the product on the warranty certificate is inconsistent with or altered the name, model or barcode of the product under warranty;

5) Damage caused by natural disasters due to force majeure.

5. Special services

In order to meet the special needs of customers for individual parts, we also provide the sales service of parts, and provide relevant installation drawings and technical support.

Note: The company reserves the right of final interpretation of after-sales service terms

III. Frequently asked Questions

1. Q: Can the customer disassemble and repair the machine by himself?

A: No.

2. Q: Can the internal hardware of the machine be replaced by itself? A: Except for key parts, other parts can be replaced by themselves.

Key components include but are not limited to: array card, dongle, backplane, etc.

Note: The whole machine will lose the quality guarantee qualification immediately once the parts are replaced by itself.

3. Q: Can the software be upgraded?

A: The software will continue to be updated and updated. We will announce the specific upgrade plan later.

Technical support

Hardware technical support:

The whole machine parts can be replaced free of charge within the warranty period. After the warranty period, paid services can be provided. Remote customers can provide remote video guidance and replace common parts.

After the warranty period, can provide paid services, details please consult dealers.

Software technical support

1. Equipment operation manual and software operation process including but not limited to text, pictures and video tutorial files are attached.

2. Provide customers with upgrade services through online or offline physical upgrading when operating software version is updated

3. Provide 7*24 hours online customer service consulting service

4. In case of special technical problems, provide engineers with one-to-one consulting services during normal working hours

After-sales service card

After-sales service card and receipt

Dear users:

In order to guarantee your rights and ensure that we provide you with perfect after-sales service, please be sure to read the after-sales service manual carefully and fill in the receipt of the product warranty card.

The user fills out： Name of contact:

Contact Address： Zip code：    Contact Number：                                                 Quantity purchased： Date of purchase:    Product model and detailed list：